STi Mesh Fog-Light Cover Installation

This is an easy installation. The STi box comes with instructions – detailed, but in Japanese. Not that you need them!
1. Open box – throw away instructions (always do this to make installation much more fun)
2. Take stock – there should be two mesh covers, two brackets and two screws
3. Unscrew phillips head screw (could also use nut driver/socket etc) at the five o’ clock position on the driver’s side fog-lamp (seven o’ clock for the passenger side)
4. Install appropriate brackets – they are marked FL and FR (point of reference was from driver’s seat, so FL is driver’s side)
5. Secure bracket with original screw
6. Place the appropriate screen in position – there are two tabs on the top of the screen and a couple on the sides. The tabs correspond to gaps in the bumper and should match up easily. Once the tabs are in place, use the screw provided to secure the screen in place – that’s it.